Gasoline Drop Hoses

Gasoline Drop Hoses that are driver-friendly by design!

· Lightweight · Super-flexible · Heavy-Duty · Last longer ·

· Easy-to-handle · Lower operating costs ·

Features & Benefits Non-permeable polyurethane construction – Tigerflex® gasoline drop hoses remain crack- and leak-resistant under the harshest of conditions. They easily handle gasoline/fuel blends made with methanol, ethanol, toluene, napthas, kerosene, benzene, MEK and MTBEs without degradation (aromatic content not to exceed 50%). And they remain super-flexible, even in sub-zero weather. Polyester fabric reinforcement – provides increased flexibility and improves ability to handle positive working pressures. Exposed PVC helix – highly abrasion-resistant and light weight … Tigerflex gasoline drop hoses are far easier to handle than conventional TPR/rubber hoses because they slide more easily and are lighter than any other drop hose. 2402DH: black polyurethane tube/orange PVC helix; 8793DH: clear polyurethane tube/yellow PVC helix. Embedded copper bonding/grounding wire - helps provide the safest way of grounding a hose assembly for gasoline and vapor transfer. Simply extract the wire from the PVC helix and bond/connect it to ground through the metal fitting, or by other means. A properly grounded gasoline drop hose assembly should measure less than 10 ohms of electrical resistance.

APPLICATION:

Redwing® Fuel Oil is for transfer and delivery of fuel oil and petroleum products for home delivery, commercial, and industrial service. Redwing Fuel Oil has two textile braids. The braided construction reduces kinking and twisting when reeling. The smooth cover has low drag resistance.

CONSTRUCTION

TUBE: Nitrile synthestic rubber (ORS)
COVER: Red Chemivic® synthetic rubber (smooth finish) (ORS)
REINFOREMENT: Braided (2) synthestic yarn.

TEMPERATURE: -40°F to 140°F (-40°C to 60°C)

PACKAGING: Reels, cut lengths, and coupled lengths.

BRANDING: Continuous brand “1” (25.4 mm) 1 braid Redwing Fuel Oil. Made in USA by Goodyear™.

COUPLINGS: Contact fitting manufacturer for proper fitting recommendation and coupling procedure.

NON-STOCK/SIZES: Refer to page 334 for special production run minimum requirements.

ORDER CODES: 532-016

APPLICATION:

For suction and discharge applications in truck and tank car transfer of gasoline, oil and other petroleum-based products with up to 50% aromatic content.

COVER: Black Nitrile PVC. Abrasion and ozone resistant.

REINFORCEMENT: High tensile textile cords and 4 highly flexible steel helix wires.

TUBE: Black conductive NBR.

TEMPERATURE RANGE: -40°F to 212°F

STANDARD LENGTH: 100 feet: 3/4” through 6”, 20 feet: 6”

WORKING PRESSURE: Constant Pressure 150 PSI

BRANDING: ALFAGOMMA – ITALY T605 – 10 BAR (150 PSI)

PETROLEUM – S & D (in red letters on black hose, in yellow letters on red hose)

HT605 is not recommended for use on a reel.

PERAFLEX TYPE BL-GGP (CHOICE OF COLOR)

Peraflex Bottom Loading Hose is constructed for optimum safety. It’s double grounded and is manufactured with a fire and abrasion resistant interior. Lightweight and easy to handle, this hose is ideal for bottom loading applications when transferring hydrocarbon and high aromatic products in refinery and distribution terminals.

G – Galvanized Steel Internal Wire
G – Galvanized Steel External Wire
P – Polypropylene Tubes
Also available with aluminum internal and external wire (BL-AAP)

Construction:
Cover: Vinyl coated polyester. Abrasion, ozone, and fire resistant
Fire Barrier: Fiberglass tightly-woven fabric
Reinforcement: High-strength, high-desity polyethylene woven fabric
Liquid Barrier: Seamless polypropylene tubes and film barriers

Specifications:
- Temperature range: -40°F to +212°F
- Electrically continuius
- Minimum burst 5 time working pressure with factory swaged ends
- 6-7% expansion under maximum pressure

End Fittings:
- TTMA Flanged Ends: Carbon steel or aluminum (Straight or 90 degree swivel)
- Swaged: Aluminum or steel

PERAFLEX LARGE BORE MARINE

Peraflex Large Bore Marine composite hose is designed to withstand the rigorous demands of the marine unloading environment. It’s lightweight and flexible for easy handling and a high-strength ballistic nylon cover insures long service life.

Peraflex marine hose maintains excellent safety standards. Typical uses include barge loading and unloading, ship-to-shore transfer, and other marine applications. Each hose is pressure tested, comes with a test report, and meets U.S. Coast Guard regulations.
 

Petroleum Service:

Peraflex Type GGP (Ballistic Cover)
G – Galvanized Internal Wire
G – Galvanized External Wire
P – Polypropylene Tubes

Chemical Service:
Peraflex Type PGP (Ballistic Cover)
P – Polypropylene Coated Galvanized Internal Wire
G – Galvanized External Wire
P – Polypropylene Tubes
Available with stainless steel internal and/or external wire

Construction:
Cover: Ballistic nylon
Reinforcement: High-strength, high-density polyethylene woven fabric
Liquid Barrier: Seamless polypropylene tubes and film barriers

Specifications:
- Temperature range: -40°F to +212°F
- Full vacuum rated
- Electrically continuous
- Safety ratio: 4 to 1
- Meets U.S. Coast Guard requirements

End Fittings:
Nipples or flanges of carbon steel, stainless steel, or aluminum, externally swaged.

• Made of kiln dried seasoned hardwood
• 13/16” (2cm) Square profile
• All edges rounded slightly
• Polyporpelene button added to foot of pole for protection.
• Durable 2.5 mil. coatings to protect against chemicals.
• Increments are embossed in 1/8 inch or 1/2 centimeters. 
• Any style scale available in black, red, or silver ink. 

B & K Gauge Poles are one of the industries most effective products for measurement of underground storage tanks. Whether it is a 50 gallon drum or a 20,000 gallon tank, our products are tough and durable to ensure a long life of accuracy and dependability. All one piece gauge poles are made from quality 13/16” x 13/16” hardwood. Embossed with a calibration of your choice, and sealed with 2.5 mil. coatings that stand up to daily use in all gasoline blends.

Features & Benefits

API adapter with one piece body, hard anodized replaceable nose ring and flat bottom.

• All running surfaces are bushed for smoother operation and extended life.
• Hard anodized replaceable nose ring that can be indexed through four positions for extended life.
• Flat bottom of valve body ensures complete product drainage and minimizes contamination.
• Product sight glass fitted at lowest point of valvefor visual check of product in pipework.
• Two stage fixed aluminum lever gives positive indication of valve position.
• Conforms to API RP1004 for total compatibility with API couplers.
• Light weight die cast aluminum construction for increased payloads with strength.
• Viton® seals are standard for compatibility with high octane fuels and additives.
• Hydrodynamic design minimizes pressure drop for high flow rates.
• Stainless steel internal components.
• Top mounting for hose interlock.
• Dryline ready for proposed future regulation

Features & Benefits

• Lightweight aluminum.
• Excellent flow rate.
• Sight glass in product port allows inspection of product flow.
• Sight glass protected by aluminum body. Prevents damage when stored in tool box.
• Can be subjected to pump off pressure (versus gravity unloading) to 25psi.
• Product connection (3” or 4” cam & groove) is located below vapor connection (3” cam & groove) reduces stress on adapter, piping and connection to tank.
• No vapor emission or product leak. Special seal assures tight connection.
• Quick and easy to rebuild.
• Option: Interlock available to assure vapor connection prior to product connection.
• Most parts interchangeable with F523 and F77.

Features & Benefits

• Industry’s lightest 4” x 4” product drop elbow.
• Excellent flow rate. .
• Simple and reliable cam design. Minimum number of moving parts.
• Easy and quick to rebuild.
• Two piece construction allows change of connector size and style.
• Sight glass is protected by aluminum body. No damage when stored in tool box.
• Most parts interchangeable with F298 and F77

Features & Benefits

• Suitable for F5000, F5001, F5002 & F552 series API valves.
•  Protects poppet face of API, prolongs life of seals.
•  High quality die cast body and component materials to international standards are used for durability and performance. 
• Radial cam and lung design for one hand operation.Glass filled nylon cams reduce wear and eliminate risk of corrosion.
• Buna seal fitted as standard. 
• Heavy duty stainless steel chain supplied as standard for attachment to API adapter. 
• 19” chain as standard.

Features & Benefits

API Hose Coupler specifically designed for use with API adapters when discharging product. Suitable for all API valves manufactures to API RP1004.

• High quality light weight die cast body.
• Brass cams reduce wear on API nose and eliminate corrosion.
• Internal shoulder to grip adapter nose and support weight of product hose.
• Stainless steelchain supplied as standard for attachment to API adapter.
• Buna seal fitted as standard.
• 3” and 4” cam & groove variants available.
• 19” chain-stainless steel.

Checkmate Retain Overfill System
2-Wire Black and White

FloTech is proud to introduce Checkmate with advanced automatic self-checking technology and performance-enhancing features not found in any other system!

The FloTech Checkmate has a long list of features that greatly improve reliability and provide years of trouble free service. Checkmate is compatible with the Scully brand black and white two-wire, overfill and retain system. The components are drop-in replacements and compatible with the signal format required by Scully brand on-board monitors.

FT208 Checkmate Retain/Overfill Monitors

Easy to follow programming guide for a maximum of eight compartments “top only” or “top and bottom” service with the same monitor
Monitor can be programmed up to 100,000 times without sending it back to the factory
Monitor resists oxidation of wire connections
Stainless steel terminal blocks resist rusting of contacts
Stainless steel hardwired used on all products
Powder coated color matched components for exceptional appearance
Auxiliary input for Hobbs type switches
Power control relay output
Drop-in compatibility, see compatibility chart on pages 14 and 15
Safety approval by FM and CSA
Wide input power 12-24 VDC
All configurations and sizes of overfill detection system probes and accessories are available